Your shopping cart is empty!
Welcome visitor you can login or create an account.
Bestsellers
-80x80.jpg)
25mm Buildings
In this range you will find a range of building suitable for the 25mm scale
This is a model of the Market Stall Weapons which has a number of features Removable Roof and back panel The scale of this model is for the 25/28mm scale.
The model is unassembled / unpainted and made from hard wearing plastic.
Sizes
Stall
Base Size 85 mm x 65mm
Height 45mm
Table
Base Size 65mm x 20mm
Heig...
This is a model of the Market Stall Weapons 2 which has a number of features Removable Roof and back panel The scale of this model is for the 25/28mm scale.
The model is unassembled / unpainted and made from hard wearing plastic.
Sizes
Stall
Base Size 75mm x 75mm
Height 45mm
Table
Base Size 65mm x 20mm
Height&n...
This is a model of the Medieval Cottage which has a number of features internal walls, floors and doorways. The scale of this model is for the 25/28mm scale.
The model is assembled (each floor)/made from hard wearing plastic and contains the following parts
1x Ground Floor
1x Roof Section
Size
Base size 135mm x 120mm
Height 160 mm
Weight of Model 1kg
...
This kit will make the Modest House 1. The has a number of features , Fireplace, 2 usable floors, Outside stair to name a few of the many features. The walls/floors inside are textured.. All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
Small Modest House 1
Base Size...
This kit will make the Modest House 2. The has a number of features , Fireplace, 2 usable floors, to name a few of the many features. The walls/floors inside are textured.. All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
Small Modest House 2
Base Size: 180mm by 160...
This set is of 4 model is the Mushrooms 2. All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
Model 1
Base Size: 40mm by 32mm
Height (at highest point): 26mm
Model 2
Base Size: 45mm by 28mm
Height (at highest point): 36mm
Model 3
Ba...
This kit will produce Zanbars House
Base Size 7 Inches x 4.5 inches
Height 5 inches
This model uses the Mythical-Linka system produced only by Mythical Dungeons. By using this system the models are a lot easier to build.
Figures and base are not included.
This model is sold in kit format with full colour step by step instructions on how to assemble the model and cast in Herculite 2 for extra strength. Some very basic modelling skill is required
...
In this set you will be able to build the castle gate, the largest of the Mythical-Linka models to date. When the model is assembled it comes in 3 sections. 2 Towers and 1 middle section.
Size of completed model
Base Size 11 inches x 6 inches
Height 9 inches (Highest point)
The kit is cast in Herculite 2 and is supplied in kit format with full instructions to assemble the models.
Please note that the weight is 4Kgs.
...
This kit will produce the Castle wall section.
Base Size 4.5 Inches x 3.5 inches
Height 5 inches
This model uses the Mythical-Linka system produced only by Mythical Dungeons. By using this system the models are a lot easier to build.
Figures and base are not included.
This model is sold in kit format with full colour step by step instructions on how to assemble the model and cast in Herculite 2 for extra strength. Some very basic modelling skill is required
...
This kit will make the Nero / Wizard Statue. The has a number of features as shown in the photos. All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
Statue
Base Size: 30mm by 30mm
Height (at highest point): 80mm
Number of Parts in kit: 1
...
This is a model of the Nobles House which has a number of features internal walls, floors (2), balcony and doorways. The scale of this model is for the 25/28mm scale.
The model is assembled (1st and 2nd floor made up form 2 parts each floor)/made from hard wearing plastic and contains the following parts
1x Ground Floor 1
1x Ground Floor 2
1x First Floor 1
1x First Floor 2
1x Roof Section
Size
Base size 240mm x 155mm
Height 200 mm...
This kit will make the noticeboard model. Which is for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
Base Size: 47mm by 15mm
Height (at highest point): 50mm
Number of Parts in kit: 1
...
This kit will make the Octagonal House The has a number of features as shown in the photos. All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / unassembled format.
Sizes
Octagonal House
Base Size: 195mm by 195mm
Height (at highest point): 265mm
Number of Parts in kit: 3
Ground Floor x1
Roof Sections x1
Doors...
This is one of the largest models that have been made at Mythical Dungeons. This model is of the Orc Fortress, it has been designed so you can change the layout in a number of ways. The set comprises of walls, walls with towers, Gate section, a stronghold and of course a Orc hovel as well.
The model is unassembled / unpainted and made from hard wearing plastic.
Sizes using the layout shown
Base Size 1080mm x 550mm (Overall)
The Stronghold itself is 460m...
This is a model of the Outpost which has a number of features internal walls, Stairs floors (5), balcony and doorways. The scale of this model is for the 25/28mm scale.
The model is assembled (1st and 2nd floor made up from 2 parts each floor, with the other floors being made from 1 part)/made from hard wearing plastic and contains the following parts
1x 1st Floor 1
1x 1st Floor 2
1x 2nd Floor 1
1x 2nd Floor 2
1x 3rd Floor
1x 4th Floor
1x 5th Flooor
1x Roof
4x Doo...
This kit will make the Pentagram / Stone Circle Which is for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
Base Size: 75mm by 75mm
Height (at highest point): 7mm
Number of Parts in kit: 1
...
A plan for use with hirst arts blocks. The model requires the following molds:
Gothic Accessories Mold 41
Gothic Dungeon Builder Mold 45
You can also purchase a full kit which contains all the blocks and a printed plan
...
This kit will make the Pool with Roof Model. The has a number of features stairs, Statues, arched windows, removable Roof to name a few of the many features. The walls/floors inside are textured.. All models is this set are for the 25/28mm scale. This model would make make a great centrepiece for and fantasy village..
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
...
In this kit you will find parts to make the prison tower. The tower a a base around 4 inch x 4 inch and features a cell battlements and warp around stairs.
Metal parts are not included.
...
This kit will make the Prison Wagon . The has a number of features as shown in the photos which includes a removable Roof/ Door. . All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / unassembled format.
Sizes
Wagon
Base Size: 220mm by 70mm
Height (at highest point): 105mm
...
This kit will make the Red Moon Portal The has a number of features as shown in the photos. All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
Red Moon Portal
Base Size: 180mm by 155mm
Height (at highest point):135mm
Number of Parts in kit 1
...
Information
My Account
Mythical Dungeons © 2024