Your shopping cart is empty!
Welcome visitor you can login or create an account.
Bestsellers
-80x80.jpg)
Buildings / Bridges
In this range you can find buildings and bridges for the 6mm scale and the 25mm scale
Refine Search
This kit will make the Modest House 1. The has a number of features , Fireplace, 2 usable floors, Outside stair to name a few of the many features. The walls/floors inside are textured.. All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
Small Modest House 1
Base Size...
This kit will make the Modest House 2. The has a number of features , Fireplace, 2 usable floors, to name a few of the many features. The walls/floors inside are textured.. All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
Small Modest House 2
Base Size: 180mm by 160...
This is a model of the Monument Building for the 6mm / Epic scale.
Sizes
Length : 95mm
Width : 95mm
Height : 150mm
The model is made from Hard Plastic and is supplied unpainted/assembled
...
This is a model of the Munitions Bunker for the 6mm / Epic scale.
The model is made from Hard Plastic
Goods are supplied unpainted and assembled.
Sizes
Length : 35mm
Width : 35mm
Height : 20mm
...
This is a model of the munitions bunker for the 6mm / Epic scale.
The model is cast in resin.
Goods are supplied unpainted and assembled.
Length : 34mm Width : 34mm Height : 14mm
Pictures 1 to 2 show the model
Pictures 3+ show the model with some models form the range.
...
This set is of 4 model is the Mushrooms 2. All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
Model 1
Base Size: 40mm by 32mm
Height (at highest point): 26mm
Model 2
Base Size: 45mm by 28mm
Height (at highest point): 36mm
Model 3
Ba...
This kit will produce Zanbars House
Base Size 7 Inches x 4.5 inches
Height 5 inches
This model uses the Mythical-Linka system produced only by Mythical Dungeons. By using this system the models are a lot easier to build.
Figures and base are not included.
This model is sold in kit format with full colour step by step instructions on how to assemble the model and cast in Herculite 2 for extra strength. Some very basic modelling skill is required
...
In this set you will be able to build the castle gate, the largest of the Mythical-Linka models to date. When the model is assembled it comes in 3 sections. 2 Towers and 1 middle section.
Size of completed model
Base Size 11 inches x 6 inches
Height 9 inches (Highest point)
The kit is cast in Herculite 2 and is supplied in kit format with full instructions to assemble the models.
Please note that the weight is 4Kgs.
...
This kit will produce the Castle wall section.
Base Size 4.5 Inches x 3.5 inches
Height 5 inches
This model uses the Mythical-Linka system produced only by Mythical Dungeons. By using this system the models are a lot easier to build.
Figures and base are not included.
This model is sold in kit format with full colour step by step instructions on how to assemble the model and cast in Herculite 2 for extra strength. Some very basic modelling skill is required
...
This kit will make the Nero / Wizard Statue. The has a number of features as shown in the photos. All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
Statue
Base Size: 30mm by 30mm
Height (at highest point): 80mm
Number of Parts in kit: 1
...
This is a model of the Nobles House which has a number of features internal walls, floors (2), balcony and doorways. The scale of this model is for the 25/28mm scale.
The model is assembled (1st and 2nd floor made up form 2 parts each floor)/made from hard wearing plastic and contains the following parts
1x Ground Floor 1
1x Ground Floor 2
1x First Floor 1
1x First Floor 2
1x Roof Section
Size
Base size 240mm x 155mm
Height 200 mm...
This kit will make the Octagonal House The has a number of features as shown in the photos. All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / unassembled format.
Sizes
Octagonal House
Base Size: 195mm by 195mm
Height (at highest point): 265mm
Number of Parts in kit: 3
Ground Floor x1
Roof Sections x1
Doors...
This is a model of the Office Block Building for the 6mm / Epic scale.
Sizes
Length : 95mm
Width : 70mm
Height : 105mm
The model is made from Hard Plastic and is supplied unpainted/assembled
...
This is a model of the Office Block 2 for the 6mm / Epic scale.
Sizes
Length : 70mm
Width : 60mm
Height : 95mm
The model is made from Hard Plastic and is supplied unpainted/assembled
...
This is one of the largest models that have been made at Mythical Dungeons. This model is of the Orc Fortress, it has been designed so you can change the layout in a number of ways. The set comprises of walls, walls with towers, Gate section, a stronghold and of course a Orc hovel as well.
The model is unassembled / unpainted and made from hard wearing plastic.
Sizes using the layout shown
Base Size 1080mm x 550mm (Overall)
The Stronghold itself is 460m...
This is a model of the Out Buildings for the 6mm / Epic scale.
The model is made from Hard Plastic
Goods are supplied unpainted and assembled.
Sizes (Building 1)
Length : 30mm
Width : 20mm
Height : 15mm
Sizes (Building 2)
Length : 25mm
Width : 20mm
Height : 15mm
...
This is a model of the Outpost which has a number of features internal walls, Stairs floors (5), balcony and doorways. The scale of this model is for the 25/28mm scale.
The model is assembled (1st and 2nd floor made up from 2 parts each floor, with the other floors being made from 1 part)/made from hard wearing plastic and contains the following parts
1x 1st Floor 1
1x 1st Floor 2
1x 2nd Floor 1
1x 2nd Floor 2
1x 3rd Floor
1x 4th Floor
1x 5th Flooor
1x Roof
4x Doo...
This is a model of the Pillbox for the 6mm / Epic scale. The model is cast in resin.
Goods are supplied unpainted and assembled.
...
This plan provids you the insturctions to make the model of a Small Dungeon Bridge The scale of the model is 25mm scale and is part of a fantastic range of fieldstone models The kit contains the parts for fieldstone. This model features a number of features which include Stairs, skulls and other features.
This model is sold in kit format with full colour step by step instructions on how to assemble the model.
Please note that you will receive blocks to build the model. There is no basing material included within the kit.
Model size base size 6 in...
This is a model of the Plinth House for the 6mm / Epic scale.
The model is made from Hard Plastic
Goods are supplied unpainted and assembled.
Sizes
Length : 40mm
Width : 30mm
Height : 22mm
...
This kit will make the Pool with Roof Model. The has a number of features stairs, Statues, arched windows, removable Roof to name a few of the many features. The walls/floors inside are textured.. All models is this set are for the 25/28mm scale. This model would make make a great centrepiece for and fantasy village..
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
...
Information
My Account
Mythical Dungeons © 2024