This is a model of the Market Stall Bar which has a number of features Removable Roof and back panel The scale of this model is for the 25/28mm scale.
The model is unassembled / unpainted and made from hard wearing plastic.
Sizes
Stall
Base Size 90mm x 65mm
Height 65mm
Table
Base Size 65mm x 20mm
Height 20mm
The model is supplied unpainted and unassembled with ...
This is a model of the Market Stall Bucher which has a number of features Removable Roof and back panel The scale of this model is for the 25/28mm scale.
The model is unassembled / unpainted and made from hard wearing plastic.
Sizes
Stall
Base Size 75mm x 75mm
Height 45mm
Table
Base Size 65mm x 20mm
Height ...
This is a model of the Market Stall Grocery 1which has a number of features Removable Roof and back panel The scale of this model is for the 25/28mm scale.
The model is unassembled / unpainted and made from hard wearing plastic. The kit can be assembled without glue and so you can change it and combine it with other models form the GS range.
Sizes
Stall
Base Size 90mm x 65mm
Height 65mm
Table
Base Siz...
This is a model of the Market Stall Grocery 2 which has a number of features Removable Roof and back panel The scale of this model is for the 25/28mm scale.
The model is unassembled / unpainted and made from hard wearing plastic.
Sizes
Stall
Base Size 75mm x 75mm
Height 45mm
Table
Base Size 65mm x 20mm
Height&n...
This is a model of the Market Stall Hardware 1 which has a number of features Removable Roof and back panel The scale of this model is for the 25/28mm scale.
The model is unassembled / unpainted and made from hard wearing plastic.
Sizes
Stall
Base Size 90mm x 65mm
Height 65mm
Table
Base Size 65mm x 20mm
Height 20mm
The model is supplied unpainted and unassemble...
This is a model of the Market Stall Hardware 2 which has a number of features Removable Roof and back panel The scale of this model is for the 25/28mm scale.
The model is unassembled / unpainted and made from hard wearing plastic.
Sizes
Stall
Base Size 75mm x 75mm
Height 45mm
Table
Base Size 65mm x 20mm
Height&...
This is a model of the Market Stall Weapons which has a number of features Removable Roof and back panel The scale of this model is for the 25/28mm scale.
The model is unassembled / unpainted and made from hard wearing plastic.
Sizes
Stall
Base Size 85 mm x 65mm
Height 45mm
Table
Base Size 65mm x 20mm
Heig...
This is a model of the Market Stall Weapons 2 which has a number of features Removable Roof and back panel The scale of this model is for the 25/28mm scale.
The model is unassembled / unpainted and made from hard wearing plastic.
Sizes
Stall
Base Size 75mm x 75mm
Height 45mm
Table
Base Size 65mm x 20mm
Height&n...
This is a model of the Mechit-Lube Building for the 6mm / Epic scale.
Sizes
Length : 110mm
Width : 90mm
Height : 60mm
The model is made from Hard Plastic and is supplied unpainted/assembled
...
In this kit you be able to make the medieval L-shaped building with Tower.
Sizes 2 inches x 2 inches (overall)
Height 3 inches. At highest point.
This model is cast in Herculite 2 and requires assembly and painting. The kit comes with full color instructions on how to assemble the model.
...
In this kit you be able to make the medievalsmall Manor house building. Sizes 2 inches x 2 inches (overall) Height 2 inches. At highest point. This model is cast in Herculite 2 and requires assembly and painting. The kit comes with full color instructions on how to assemble the model.
...
In this set you will find a set of 7 street tiles used to make up roads for the 6mm scale
5x 2 inches x 2 inches
2x 2 inches x 1 inch
Photo 1 shows the titles placed together and as the tiles are
This model is cast in Herculite 2 and requires assembly and painting.
Figure(s)/buildings shown are not included and are only to show the scale of the model.
...
This is a model of the Medieval Cottage which has a number of features internal walls, floors and doorways. The scale of this model is for the 25/28mm scale.
The model is assembled (each floor)/made from hard wearing plastic and contains the following parts
1x Ground Floor
1x Roof Section
Size
Base size 135mm x 120mm
Height 160 mm
Weight of Model 1kg
...
This is a model of the Medium Block Building for the 6mm / Epic scale.
Sizes
Length : 155mm
Width : 55mm
Height : 85mm
The model is made from Hard Plastic and is supplied unpainted/assembled
...
This is a model of the Medium Cylindrical Building for the 6mm / Epic scale.
Sizes
Length : 145mm
Width : 45mm
Height : 60mm
The model is made from Hard Plastic and is supplied unpainted/assembled
...
This is a model of the Medium Dwelling for the 6mm / Epic scale.
Length : 33mm Width : 28mm Height : 18mm
The model is cast in resin.
Goods are supplied unpainted and assembled.
...
This is a model of the Medium Dwelling 2 for the 6mm / Epic scale.
The model is cast in resin.
Goods are supplied unpainted and assembled.
Length : 41mm Width : 51mm Height : 20mm
Pictures 1 to 4 show the model
Pictures 5+ show the model with some models form the range.
...
This is a model of the Medium House 1 for the 6mm / Epic scale.
The model is made from Hard Plastic
Goods are supplied unpainted and assembled.
Sizes
Length : 37mm
Width : 20mm
Height : 20mm
...
This is a model of the Medium House 2for the 6mm / Epic scale.
The model is made from Hard Plastic
Goods are supplied unpainted and assembled.
Sizes
Length : 50mm
Width : 30mm
Height : 20mm
...
This is a model of the Medium Office Block 2 for the 6mm / Epic scale.
Sizes
Length : 110mm
Width : 110mm
Height : 140mm
The model is made from Hard Plastic and is supplied unpainted/assembled
...
This is a model of the Medium Tower for the 6mm / Epic scale.
The model is made from Hard Plastic
Goods are supplied unpainted and assembled.
Sizes
Length : 40mm
Width : 30mm
Height : 70mm
...