Your shopping cart is empty!
Welcome visitor you can login or create an account.
Bestsellers
-80x80.jpg)
Buildings / Bridges
In this range you can find buildings and bridges for the 6mm scale and the 25mm scale
Refine Search
This is a model of the Tech Centre for the 6mm / Epic scale.
Sizes
Length : 135mm
Width : 45mm
Height : 95mm
The model is made from Hard Plastic and is supplied unpainted/assembled
...
This kit will produce the temple entrance. The model contains a number of great features which include inside Pillars, Sphinx statues. Obelisks.
The Base as per the instructions size is 9 inches x 12 inches
Pillar Height 4 inches
Obelisks Height 7 inches
Sphinx Statues Height 1 inch
The kit comes complete with full colour instructions on how to build the models. Please mote that the base is not included.
...
This is a model of the LThached House for the 6mm / Epic scale. The model is cast in resin.
Goods are supplied unpainted and assembled.
...
This is a model of the Thatched House 3 for the 6mm /Epic scale. The model is cast in resin.
Goods are supplied unpainted and assembled.
Sizes:
Base size 35mm x 25mm
Height 30 mm
...
This is model is of the great temple. As you can see there are a lot of pillars and décor. Each pillar has hieroglyphics. Could they be giving information on a time gone by or a clue to a hidden treasure.
Figures and base are not included.
This model is sold in kit format with full colour step by step instructions on how to assemble the model and cast in Herculite 2 for extra strength. Basic modelling skill is required.
Base size 11 inches x 6 inches
Height 5.5 inches
&...
A resin model of a Tower for the 6mm scale.
The model is supplied in assembled and unpainted. All of these models are cast in Polyurethane Resin.
Some sanding may be required.
Base Size 18 mm x 18 mm
...
This is a model of the Tower House which has a number of features internal walls, floors (4), fireplace, ladder and doorways. The scale of this model is for the 25/28mm scale.
The model is assembled and made from hard wearing plastic and contains the following parts
1x Ground Floor 1
1x First Floor
1x Roof section with tower
1x Third Floor (Tower)
1x Fourth Floor(Tower)
1x Roof (Tower)
2x Doors
Size
Base size 135mm x 125mm
Height 325...
This kit will make the Tower House 2 The has a number of features as shown in the photos. All models is this set are for the 25/28mm scale. There are 4 floors
It is made from hard plastic and come in a unpainted / unassembled format.
Sizes
Tower House 2
Base Size: 190mm by 250mm
Height (at highest point): 350mm
Number of Parts in kit: 6
Ground Floor x1
First Floor x...
This is a model of the Turret for the 6mm / Epic scale.
Sizes
Length : 40mm
Width : 40mm
Height : 27mm
The model is made from Hard Plastic and is supplied unpainted/assembled
...
This is a model of the Twin Dome Building for the 6mm / Epic scale.
Sizes
Length : 55mm
Width : 47mm
Height : 30mm
The model is made from Hard Plastic and is supplied unpainted/assembled
...
This is a model of the Twin Dome Building for the 6mm / Epic scale.
Length : 48mm Width : 29mm Height : 26mm
The model is cast in resin.
...
This is a model of the Vaulted House for the 6mm / Epic scale.
The model is made from Hard Plastic
Goods are supplied unpainted and assembled.
Sizes
Length : 90mm
Width : 30mm
Height : 28mm
...
This is a model of the Villar for the 6mm / Epic scale.
The model is made from Hard Plastic
Goods are supplied unpainted and assembled.
Sizes
Length : 50mm
Width : 35mm
Height : 30mm
...
This is a model of the Warehouse for the 6mm / Epic scale.
The model is made from Hard Plastic
Goods are supplied unpainted and assembled.
Sizes
Length :70mm
Width : 25mm
Height : 30mm
...
This kit will make the Watchtower. the model features 2 floors with removable parts.All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
Base Size: 100mm by 130mm
Height (at highest point): 170mm
Number of Parts in kit: 5
...
This is a model of the Witches House which has a number of features internal walls, floors (2), and doorways with doors the open and close. The scale of this model is for the 25/28mm scale.
The model is unassembled / unpainted and made from hard wearing plastic.
Sizes
Base Size 180mm x 180mm
Height 335mm
Number of Parts : 8
Size
Base size 1800mm x 140mm
Height 140mm
...
This is a model of the Wizards Tower which has a number of features internal walls, floors (7), and doorways. This model also includes 14 items (Furniture) and a wizard. The scale of this model is for the 25/28mm scale.
The model is assembled and made from hard wearing plastic and contains the following parts which is unpainted.
1x Ground Floor
1x 1st Floor
1x 2nd Floor
1x 3rd Floor
1x 4th floor.
1x Roof with balcony/Doorways
1x Roof Section
1x Roof section with Arches
...
This is model is of the wizards tower. As you can see there are a lot of decor and other features
Figures and base are not included.
This model is sold in kit format with full colour step by step instructions on how to assemble the model and cast in Herculite 2 for extra strength. Basic modelling skill is required.
Base size 5 inches x 4.5 inches
Height 8 inches
...
This kit will make the Wizards Tower 2 The has a number of features as shown in the photos. All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
Wizards Tower
Base Size: 160mm by 160mm
Height (at highest point): 450mm
Number of Parts in kit: 6
Ground Floor x1
Mid Sextions x 4
Roof Sect...
This is a model of the Workshop for the 6mm / Epic scale.
The model is made from Hard Plastic
Goods are supplied unpainted and assembled.
Sizes
Length : 40mm
Width : 25mm
Height : 23mm
...
Information
My Account
Mythical Dungeons © 2024