Your shopping cart is empty!
Welcome visitor you can login or create an account.
Bestsellers
-80x80.jpg)
Buildings / Bridges
In this range you can find buildings and bridges for the 6mm scale and the 25mm scale
Refine Search
This kit will make the Ruin 8 . All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
Base Size: 75mm by 40mm
Height (at highest point): 75mm
Number of Parts in kit: 1
...
This kit will make the Ruin 9 . All models is this set are for the 25/28mm scale.
It is made from hard plastic and come in a unpainted / assembled format.
Sizes
Base Size: 65mm by 25mm
Height (at highest point): 60mm
Number of Parts in kit: 1
...
This is a model of the Ruined Barn for the 6mm / Epic scale. The model is cast in resin.
Goods are supplied unpainted and assembled.
Sizes:
Base size 50mm x 30mm
Height 15 mm
...
This is a model of the Ruined Cottage for the 6mm / Epic scale. The model is cast in resin.
Goods are supplied unpainted and assembled.
Size Base Size 50mm x 30mm
Height 15mm
...
This kit will produce the Fieldstone Ruined Tower, As you can see there are a lot of pillars and arches. A stair leads up to the second level.
Figures and base are not included.
This model is sold in kit format with full colour step by step instructions on how to assemble the model and cast in Herculite 2 for extra strength. Basic modelling skill is required.
Base size 10 inches x 10 inches
Height 8 inches
...
This is a model of the Ruined House 1 which has a number of features internal walls, floors (3), The scale of this model is for the 25/28mm scale.
The model is unassembled / unpainted and made from hard wearing plastic.
Sizes
Base Size 145mm x 210mm
Height 220mm
The model is supplied unpainted and unassembled
Number of parts 4
1x Ground Section
1x 1st Floor Section
1x 2nd Floor Section
1x ...
This is a model of the Ruined House 2 which has a number of features internal walls, floors (3), The scale of this model is for the 25/28mm scale.
The model is unassembled / unpainted and made from hard wearing plastic.
Sizes
Base Size 150mm x 180mm
Height 200mm
The model is supplied unpainted and unassembled
Number of parts 5
1x Ground Section
1x 1st Floor Section
1x Roof Section Lower
1x...
This is a model of the Ruined House 3 which has a number of features internal walls, floors (3), The scale of this model is for the 25/28mm scale.
The model is unassembled / unpainted and made from hard wearing plastic.
Sizes
Base Size 160mm x 180mm
Height 200mm
The model is supplied unpainted and unassembled
Number of parts 6
1x Ground Section
1x 1st Floor Section
1x Large Floor Section
1x Roo...
Near the Dreki's Skull, there is a ruined temple with some sort of strange portals...
The model is assembled and made from hard wearing plastic and contains the following parts
Temple Part (2 Part model)
Which features a doorway, windows, Ruined walls/windows and rubble piles.
Base Size 170mm x 270mm
Height 200mm
Portal (1 part model
Which features stairs and portal
Base Size 210mm x 110mm
Height 140mm
Statues (6 Statues,...
This kit will produce the Ruined Tower, As you can see there are a lot of pillars and arches. A circular stair leads up to the second level where there are further pillars and arches.
Figures and base are not included.
This model is sold in kit format with full colour step by step instructions on how to assemble the model and cast in Herculite 2 for extra strength. Basic modelling skill is required as some bricks need to be broken for the ruin effect.
Base size 13 inches x 10 inches
Heigh...
This kit makes two checkpoint models. As you can see it has a lot of details like doos, guns, just to name a few of the many features this model has. The scale of the model is 6mm or 1/300.
Base size 1.25 inches x 1.75 inches
Hieght of about 1.75 inches at the highest point.
The model is cast in Herculite 2 and requires assembly and painting. Full colour step by step instructions are included to make this highly detailed building. Very basic model making skills are required
...
This kit makes the command bunker. As you can see it has a lot of details like doors, Comms dish, just to name a few of the many features this model has. The scale of the model is 6mm or 1/300.
Base size 2 inches x 2 inches
Hieght of about 3.25 inches at the highest point.
The model is cast in Herculite 2 and requires assembly and painting. Full colour step by step instructions are included to make this highly detailed building. Very basic model making skills are required
...
This kit produces the Garage 1 There are a number of features. The scale of the model is 6mm
Sizes Base Size 3 inches x 1.2 inches
Height 1.5 inches
This model is supplied as a kit and requires assembly and is supplied unpainted. Full instructions are included. The model is cast in Herculite 2
Figure(s) shown are not included and are only to show the scale of the model.
The model is supplied in kit format with full colour instructions on how to assemble these mode...
This kit produces the Garage 2 There are a number of features. The scale of the model is 6mm
Sizes Base Size 3 inches x 2.2 inches
Height 2.25 inches
This model is supplied as a kit and requires assembly and is supplied unpainted. Full instructions are included. The model is cast in Herculite 2
Figure(s) shown are not included and are only to show the scale of the model.
The model is supplied in kit format with full colour instructions on how to assemble these mod...
This kit produces the Loading Bay There are a number of features. The scale of the model is 6mm
Sizes Base Size 3.5 inches x 2 inches
Height 1.75 inches
This model is supplied as a kit and requires assembly and is supplied unpainted. Full instructions are included. The model is cast in Herculite 2
Figure(s) shown are not included and are only to show the scale of the model.
The model is supplied in kit format with full colour instructions on how to assemble these ...
This kit produces the Munitions Bunker There are a number of features including 4 guns and central tower. The scale of the model is 6mm
Sizes Base Size 3 inches x 3 inches
Height 2 inches
This model is supplied as a kit and requires assembly and is supplied unpainted. Full instructions are included. The model is cast in Herculite 2
Figure(s) shown are not included and are only to show the scale of the model.
The model is supplied in kit format with full colour ins...
This kit makes the Research Lab model. As you can see it has a lot of details pipes, chimneys of different sizes, chemical storage tanks and even a walkway with an observation platform, just to name a few of the many features this model has. The scale of the model is 6mm or 1/300.
Base size 5 inches x 5 inches
Hieght of about 3 inches at the highest point.
The model is cast in Herculite 2 and requires assembly and painting. Full colour step by step instructions are included to make this highly detailed building. Very basic model making skills are required
...
This kit produces the Science Lab There are a number of features including Smoke Stack and equipment on the roof. The scale of the model is 6mm
Sizes Base Size 4 inches x 3.25 inches
Height 1.75 inches
This model is supplied as a kit and requires assembly and is supplied unpainted. Full instructions are included. The model is cast in Herculite 2
Figure(s) shown are not included and are only to show the scale of the model.
The model is supplied in kit format with f...
This is a model of the science Lab for the 6mm / Epic scale.
Sizes
Length : 60mm
Width : 45mm
Height : 22mm
The model is made from Hard Plastic and is suppied unpainted/assembled
...
This is a model of the science Lab for the 6mm / Epic scale.
Length : 50mm Width : 43mm Height : 20mm
The model is cast in resin.
...
This is a model of the Wall Section Corner for the 6mm / Epic scale.
Sizes
Length : 50mm
Width : 50mm
Height : 50mm
The model is made from Hard Plastic and is supplied unpainted/assembled
...
Information
My Account
Mythical Dungeons © 2024